Capabilities
Every process, one works
From resin to inspected, packed assembly — the machines, materials and tolerances a procurement engineer needs to see.
What we do
Every process from mould to inspected part
One accountable supplier for the whole job — we cut the mould, run the press and sign off the dimensions, so nothing falls between vendors.
Injection moulding
Presses from 50 to 650 tonne
01 · Injection moulding
Presses from 50 to 650 tonne
Forty-two moulding machines across three halls run engineering and commodity resins — PA, PC, ABS, POM, PBT, PP and glass-filled grades — with material drying, gravimetric dosing and process monitoring on every shot.
02 · Tooling
In-house mould design & toolmaking
Our tool room designs, cuts and trials moulds under one roof — CNC machining, EDM and polishing — so lead times and mould revisions stay in our control, not a third party's queue.
03 · Cleanroom
Cleanroom moulding & assembly
An ISO Class 8 (Class 100,000) cleanroom for medical and optical parts — moulding, insert and overmoulding, ultrasonic welding and assembly, all within a controlled, traceable environment.
04 · Quality
Metrology & full inspection
CMM and vision measurement, first-article inspection to your drawing and in-line SPC — with certificates of conformance that travel with every shipment.
Shop capability
The spec sheet
Injection moulding
- Machines
- 42 presses, 50–650 tonne
- Shot weight
- Up to 1,800 g
- Automation
- 6-axis take-out robots, IML-ready
- Process control
- Gravimetric dosing · shot monitoring
Tooling
- Design
- Mould flow · DFM in-house
- Toolmaking
- CNC · EDM · polishing
- Cavitation
- Single to 96-cavity
- Lead time
- 5–8 weeks typical
Materials
- Engineering
- PA, PC, POM, PBT, PC/ABS
- Commodity
- PP, ABS, PS, PE
- Filled & special
- GF/CF grades, TPE, medical
- Value-add
- Insert & overmoulding, 2K
Quality & tolerance
- Tolerance
- to ±0.02 mm on critical features
- Metrology
- CMM · vision · profilometry
- Standards
- ISO 9001 · 13485 · IATF 16949
- Cleanroom
- ISO Class 8 (100,000)
How a job runs
From your drawing to a shipped, inspected part
A single project engineer owns your programme end to end, so you always know where the job stands.
Enquiry & DFM review
Send a drawing or a sample. Our engineers review it for mouldability — wall sections, draft, gate and material — and come back with a costed quote, usually within two working days.
Tooling & first-off
We design and cut the mould in-house, then trial it and present first-article samples with a full dimensional report for your sign-off before any volume is committed.
Validated production
Approved tools move to a monitored production cell — automated where volume warrants — running to a control plan with process data captured on every shot.
Inspection & traceability
In-line SPC plus CMM and vision checks against your drawing. Every lot ships with a certificate of conformance and full material traceability.
Finishing & delivery
Pad printing, assembly and packing to your spec, then scheduled or kanban delivery across Malaysia and to 14 export markets — on the dates the line needs them.
Request a quote
Send us a drawing. We'll send back a plan.
Material, tolerance, finish and lead time — usually within two working days. Talk to our engineers, not a call centre.